DSM AWD Stage 4 Transmission Rebuild

Manufacturer : Xtreme Fabrications
Part Number : XPS-TRANS-W5M-R04

Price $2,500.00


Please Choose:



Add to Cart:






Our STAGE 4 REBUILD is a custom top of the line, fully built, racing transmission rebuild kit. All of the 1st-4th gear internal parts, including the shafts, are replaced with a stronger custom gear set which includes double synchros and close-ratio 3rd/4th gear ratios to keep your RPMs up and your monster turbo spooling. This transmission gearset can easily shift at over 10,000 RPMs with a properly functioning clutch. The center differential is welded solid, locking the front and rear pinion gears and eliminating another weak link in the transmission. Lubrication improvements are made by modifying the internal oiling circuits.

Includes:

  • Heavy Duty "Evo III" Conversion Gear Set
  • 11% Taller 1st Gear with Synchro Ring
  • Heavy Duty 2nd Gear with Double Synchro Rings
  • Heavy Duty 3rd Gear with Double Synchro Rings
  • Heavy Duty 4th Gear with Double Synchro Rings
  • 5th Gear Synchro Ring
  • Reverse Synchro Ring
  • 1st/2nd Gear Synchro Hub & Sleeve
  • 1st/2nd Gear Synchro Keys & Springs
  • 1st/2nd Gear Shift Fork
  • Heavy Duty 3rd/4th Gear Synchro Hub & Sleeve
  • Heavy Duty 3rd/4th Gear Synchro Keys & Springs
  • Heavy Duty 3rd/4th Gear Shift Fork
  • Heavy Duty 3rd/4th Gear Shift Rail
  • 5th/Rev Gear Synchro Keys & Springs
  • NEW Input Shaft with 11% taller Evo III 1st Gear
  • NEW Intermediate Shaft
  • New Needle Bearings under every gear
  • Input Shaft Tapered Roller Bearings
  • Intermediate Shaft Tapered Roller Bearings
  • Welded Center Differential
  • Center Differential Bearings
  • Improved Lubrication, Modified Oil Circuits
  • Heavy Duty Shift Fork Roll Pins
  • 5th Gear Retaining End Nuts
  • Shims for setting pre-load & clearances
  • Axle Seals, Input Shaft Seal and Output Shaft Seal
  • Nylon Shifter Pad
  • Clutch Fork Pivot Ball
  • Clutch Fork Boot
  • Reverse Brake Wave Spring
  • Reverse Brake Cone
  • Filter/Oil Screen
  • Upgraded Particle Magnet
  • Magnet Drain Plug
  • Trans-to-Engine Alignment Dowels
  • New Case Bolts
  • All Parts Cleaned and Hot Tanked
  • Media Blasted for a like-new appearance
  • Professionally Assembled
  • Blueprinted to our Proprietary "STAGE 4" Specifications
This item is custom and built-to-order to your specifications. If we find any other parts that need to be repaired or replaced during our inspection of the core parts you provide, we will contact you to discuss the available options.


This product was added to our catalog on Friday 29 July, 2011.

Your IP Address is: 3.235.62.151
XTREME FABRICATIONS 201 CLEARIDGE DR. ROCKVALE, TN 37153 +1(615)-274-9771
Copyright © 2020 Xtreme Fabrications. All Rights Reserved.